Perform a Gateway Reset

If the KleverKey Gateway has already programmed WiFi settings, no new WiFi settings can be set. To do this, the WiFi settings must first be reset. The gateway no longer has any WiFi settings set when it flashes blue.

Reset WiFi settings

Press reset button for 4 seconds until the status LED starts blinking blue. Don't press the reset button too long, to prevent doing a factory reset.

Factory reset

Press reset button for 10 seconds until the status LED starts blinking red. This will delete the WiFi settings and all lock related data.

1 Use a paper clip to press reset button
2 Check LED: Blinks Blue: Reset Successful