This article shows how to add a KleverKey smartcard to the system in case the QR code is lost.
You will need a cell phone that can read NFC tags. (Make sure that this function is also activated).
You can find a list of all possible devices here.
With an iOS Device
- Download the NFC Tools app from the App Store.
- Open NFC Tools and select the "Read" function.
- Hold the smartcard against the phone. (Depending on the model, the smartcard must be held at a different point on the phone. If scanning does not work, try different positions on the front and back).
- Copy the serial number, which will be displayed in the app after reading.
- Log in to the KleverKey portal.
- Under "Hardware", select the "Smartcards" option.
- Press the plus in the lower right corner and select "Add smartcard".
- Enter the previously read serial number in the "UID" field and add four zeros to the number.
- Give your card a name and press "Add".
With an Android Device
- Download the NFC Tools app from the Play Store.
- Open NFC Tools and hold the smartcard to the phone. (Depending on the model, the smartcard must be held at a different point on the phone. If scanning does not work, try different positions on front and back side).
- Copy the serial number, which will be displayed in the app after reading.
- Log in to the KleverKey portal.
- Under "Hardware", select the "Smartcards" option.
- Press the plus in the lower right corner and select "Add smartcard".
- Enter the previously read serial number in the "UID" field and add four zeros to the number.
- Give your card a name and press "Add".
Comments
0 comments
Please sign in to leave a comment.