Add ISO14443A card or Swisspass

The aim of this article is to show how you can add a smartcard ISO14443A (e.g. credit card) or a Swisspass as a keycard for your lock. 

Add smartcard ISO14443A

Important: Not all ISO14443A smartcards work with KleverKey locks. Please contact us (support@kleverkey.com) to verify that your card meets the requirements for use with our products.

This function works only if you select "UID authentication".

(Hardware ->Locks, select lock and press "Customize settings").

• Log in to the KleverKey Portal 
• Select your user in the upper right corner and click on "Phones & Cards".
• Click on the plus icon in the lower right corner and select "Add Smartcard".
• Select the type "ISO14443A Smartcard".
• Scan your card with an NFC scanner (e.g. NFC Tools) (How?) or with a card-reader, see KleverKey Shop
• Enter the serial number in the "UID" field. Fill the unneeded digits at the end with 0!
• Select a name for your card and click "Add".

Add Swisspass 

• Log in to the KleverKey Portal
• Select your user in the upper right corner and click on "Phones & Cards".
• Click on the plus icon in the lower right corner and select "Add Smartcard".
• Select the type "Swisspass".
• Enter your Swisspass ID and postal code
• Once you press "Add" it will sync with all the locks you have authorization for.

Instructions: Reading the UID of a smart card

• Download the NFC Tools app from the App Store.
• Open the app and select the "Read" function.
• Hold the smartcard up to your phone. (Depending on the model, the smartcard may need to be held to the phone at a different point. If scanning doesn't work, try different positions on front and back).
• Copy the serial number, which is displayed in the app after reading.